£8.25 per M2
Firestone Flat Roof Membrane
Firestone RubberCover 1.14mm EPDM flat roof membrane. Simple installation, even with no roofing experience. EPDM offers unmatched longevity for a low life cycle cost.

Firestone flat roof membranes offer both trade and DIY roofers high quality and exceptional performance. Flexible and durable over a 50-year life expectancy. We can cut your membrane to any size whether your project is large or small.
 

• Fast and easy to install
• Custom cut to any size
• 50-year life expectancy

Specifications:

• Thickness 1.14mm
• Weight 1.4kg per m2

Options Available:
Standard grade EPDM is ideal for shed roofs and all other types of flat roofing. For heavier duty installations, this remarkable Firestone flat roof membrane is available in premium grade at 1.52mm thickness. 
Features and benefits of standard Firestone flat roof membrane:

FAST AND EASY TO INSTALL
 Applied in a single sheet, resulting in fewer seams and reduced installation time. Cold applied using water-based and bonding adhesives. Safe and easy to apply. Ideal for DIY.

SUPERIOR WEATHERABILITY AND DURABILITY

Unmatched resistance to ozone and UV radiation. 100% water resistant over the long term. Proven worldwide high performance in a range of locations and climates. Life expectancy of over 50 years.

HIGH FLEXIBILITY AND ELONGATION

Remains flexible at extreme temperatures and maintains UV stability. Elongation over 300% to accommodate significant building movement and temperature fluctuations.

LOW LIFE-CYCLE COST

Requires little or no maintenance over the lifespan. Suitable for DIY application and reduces professional installation time. Firestone EPDM is a long-term flat roof waterproofing solution with a low life cycle cost.

ENVIRONMENTALLY FRIENDLY
 
Limited environmental impact during the manufacturing process and throughout use. Fully recyclable.
How to fit Firestone flat roof systems - Fully adhered application
Both preparation and installation of Firestone flat roof systems are important to ensure the best performance from your project. The following EPDM products will ensure a top-notch system that will offer longevity and reliability:
•             Permaroof Water Based Adhesive
•             Permaroof Bonding Adhesive
•             Permaroof Upvc Gutter Trim (2.5m)
•             Permaroof Upvc Edge Trim (2.5m)
•             Permaroof Upvc Edge Trim (3.5m)
•             Permaroof External Corner
•             Permaroof External Corner End Cap
•             Permaroof Edge Trim End Cap
•             Permaroof Joint Clip
•             Permaroof Closed Cell Foam Tape (6m roll)
•             Polypins (box of 250)
 
Note that quantities and trim types will vary according to your project dimensions and requirements. The Permaroof teams are happy to advise. Call us on 01773 441 947 or use the free EPDM Kit Builder App.
Preparation of the roof deck
Ensure the surface is free from debris, dirt and dust and is in good condition. Correct preparation is essential to ensure both successful application of the EPDM flat roofing system and long-term performance. (see additional resources below for full preparation guide).
Application of the membrane
When the EPDM membrane is laid over the surface area, allow the membrane to rest for around 30 minutes to allow packing creases to dissipate.
 
Apply the membrane from the centre of the roof, working out towards the perimeter edges.
 
Fold the EPDM back to expose around half of the roof substrate.
 
Use a 9” roller to apply water-based bonding adhesive to the substrate (timber only).
 
Roll the membrane into the adhesive and remove trapped air or wrinkles by smoothing with a soft bristle broom.
 
Apply trim as necessary to create a fully watertight, professional finish.
 
To download your EPDM installation guides, please visit the Permaroof resource library.