A unique and patented design. Used along the Gutter edge. It sandwiches the EPDM roofing membrane eliminating penetration when fixing. It is a 2 part trim sold together and comes in 2.5m lengths.

APPLICATION

The Gutter back plate must be installed prior to the membrane, the top of the plate must be flush with the deck. The EPDM will overhang approx 50mm , the front plate is then pushed under the hook of the back plate with the membrane between the two, this will then clip into place to form a smooth finish.

Extruded using virgin plastic ensuring colour fast, non brittle, identical profiles. Manufactured BSI Quality assured  to 99.9% accuracy.
 

Benefits

• Creates a smooth run off for water.
• Extruded from recycled materials
• Ensures an EPDM roof is watertight along the gutter edge

Application

• Used along the gutter edge
• Sandwiches the EPDM roofing membrane
• The gutter back plate must be installed prior to the membrane
• The top of the plate must be flush with the deck
• The EPDM will overhang approx. 50mm
• Use a bead of Bond & Seal between the membrane and front plate to ensure a watertight seal, before fixing with the polypins provided

For use with the Permaroof rubber roofing system:

• Superior durability
• Very low life-cycle cost
• Flame-free and easy installation
• High flexibility and elongation
• Environmentally friendly
• Recovery of rainwater
• Fire resistant
• 1.14mm Standard grade epdm rubber membrane for flat roof waterproofing solutions
• 20 year membrane warranty
• Life expectancy is 50 years plus

Product code: QTGUTTER