216mm Diameter

Description

Quickseam Corner Flashing is a 216 mm in diameter round piece of uncured EPDM factory laminated to QuickSeam Tape. It is designed to flash outside corners or to be used as a cover patch for repairs where appropriate.

Preparation

EPDM surfaces and/or mating surfaces must be prepared with QuickPrime Plus, using a QuickScrubber tool. Use of other products is not allowed. Restore the product to room temperature prior to use if exposed to temperatures below 15ºC for prolonged periods.

Application

On cold days with ambient temperature below 5ºC, the use of a heat gun is recommended to warm the Quickseam Corner Flashing and to ensure good formability. On normal days, preheating of the product is not necessary.

Coverage

One piece per corner.

This product must be used with  Quickprime Plus, and applied using a Quickscrubber Pad & Handle.